Solid Self-nanoemulsifying Drug Delivery System Research Articles

Solid Self-Nanoemulsifying Drug Delivery Systems of Furosemide: In Vivo Proof of Concept for Enhanced Predictable Therapeutic Response

Liquid self-nano emulsifying drug delivery systems (SNEDDS) of furosemide (FSM) have been explored as a potential solution for enhancing solubility and permeability but are associated with rapid emulsification, spontaneous drug release, and poor in vivo correlation. To overcome the shortcoming, this study aimed to develop liquid and solid self-emulsifying drug delivery systems for FSM, compare formulation dynamics, continue in vivo therapeutic efficacy, and investigate the advantages of solidification. For this purpose, liquid SNEDDS (L-SEDDS-FSM) were formed using oleic acid as an oil, chremophore EL, Tween 80, Tween 20 as a surfactant, and PEG 400 as a co-surfactant containing 53 mg/mL FSM. At the same time, solid SNEDDS (S-SEDDS-FSM) was developed by adsorbing liquid SNEDDS onto microcrystalline cellulose in a 1:1 ratio. Both formulations were evaluated for size, zeta potential, lipase degradation, and drug release. Moreover, in vivo diuretic studies regarding urine volume were carried out in mice to investigate the therapeutic responses of liquid and solid SNEDDS formulations. After dilution, L-SEDDS-FSM showed a mean droplet size of 115 ± 4.5 nm, while S-SEDDS-FSM depicted 116 ± 2.6 nm and zeta potentials of −5.4 ± 0.55 and −6.22 ± 1.2, respectively. S-SEDDS-FSM showed 1.8-fold reduced degradation by lipase enzymes in comparison to L-SEDDS-FSM. S-SEDDS-FSM demonstrated a sustained drug release pattern, releasing 63% of the drug over 180 min, in contrast to L-SEDDS-FSM, exhibiting 90% spontaneous drug release within 30 min. L-SEDDS-FSM exhibited a rapid upsurge in urine output (1550 ± 56 μL) compared to S-SEDDS-FSM, showing gradual urine output (969 ± 29 μL) till the 4th h of the study, providing sustained urine output yet a predictable therapeutic response. The solidification of SNEDDS effectively addresses challenges associated with spontaneous drug release and precipitation observed in liquid SNEDDS, highlighting the potential benefits of solid SNEDDS in improving the therapeutic response of furosemide.

The Impact of Polymers on Enzalutamide Solid Self-Nanoemulsifying Drug Delivery System and Improved Bioavailability

Enzalutamide (ENZ), marketed under the brand name Xtandi® as a soft capsule, is an androgen receptor signaling inhibitor drug actively used in clinical settings for treating prostate cancer. However, ENZ’s low solubility and bioavailability significantly hinder the achievement of optimal therapeutic outcomes. In previous studies, a liquid self-nanoemulsifying drug delivery system (L-SNEDDS) containing ENZ was developed among various solubilization technologies. However, powder formulations that included colloidal silica rapidly formed crystal nuclei in aqueous solutions, leading to a significant decrease in dissolution. Consequently, this study evaluated the efficacy of adding a polymer as a recrystallization inhibitor to a solid SNEDDS (S-SNEDDS) to maintain the drug in a stable, amorphous state in aqueous environments. Polymers were selected based on solubility tests, and the S-SNEDDS formulation was successfully produced via spray drying. The optimized S-SNEDDS formulation demonstrated through X-ray diffraction and differential scanning calorimetry data that it significantly reduced drug crystallinity and enhanced its dissolution rate in simulated gastric and intestinal fluid conditions. In an in vivo study, the bioavailability of orally administered formulations was increased compared to the free drug. Our results highlight the effectiveness of solid-SNEDDS formulations in enhancing the bioavailability of ENZ and outline the potential translational directions for oral drug development.

Polysaccharide-fecal microbiota-based colon-targeted self-nanoemulsifying drug delivery system of curcumin for treating polycystic ovarian syndrome.

The gut microbiome is involved in the pathogenesis of many diseases including polycystic ovarian syndrome (PCOS). Modulating the gut microbiome can lead to eubiosis and treatment of various metabolic conditions. However, there is no proper study assessing the delivery of microbial technology for the treatment of such conditions. The present study involves the development of guar gum-pectin-based solid self-nanoemulsifying drug delivery system (S-SNEDDS) containing curcumin (CCM) and fecal microbiota extract (FME) for the treatment of PCOS. The optimized S-SNEDDS containing FME and CCM was prepared by dissolving CCM (25mg) in an isotropic mixture consisting of Labrafil M 1944 CS, Transcutol P, and Tween-80 and solidified using lactose monohydrate, aerosil-200, guar gum, and pectin (colon-targeted CCM solid self-nanoemulsifying drug delivery system [CCM-CT-S-SNEDDS]). Pharmacokinetic and pharmacodynamic evaluation was carried out on letrozole-induced female Wistar rats. The results of pharmacokinetic studies indicated about 13.11 and 23.48-fold increase in AUC of CCM-loaded colon-targeted S-SNEDDS without FME (CCM-CT-S-SNEDDS (WFME)) and CCM-loaded colon-targeted S-SNEDDS with FME [(CCM-CT-S-SNEDDS (FME)) as compared to unprocessed CCM. The pharmacodynamic study indicated excellent recovery/reversal in the rats treated with CCM-CT-S-SNEDDS low and high dose containing FME (group 13 and group 14) in a dose-dependent manner. The developed formulation showcasing its improved bioavailability, targeted action, and therapeutic activity in ameliorating PCOS can be utilized as an adjuvant therapy for developing a dosage form, scale-up, and technology transfer.

Formulation Development of Solid Self-Nanoemulsifying Drug Delivery Systems of Quetiapine Fumarate via Hot-Melt Extrusion Technology: Optimization Using Central Composite Design.

Quetiapine fumarate (QTF) was approved for the treatment of schizophrenia and acute manic episodes. QTF can also be used as an adjunctive treatment for major depressive disorders. QTF oral bioavailability is limited due to its poor aqueous solubility and pre-systemic metabolism. The objective of the current investigation was the formulation development and manufacturing of solid self-nanoemulsifying drug delivery system (S-SNEDDS) formulation through a single-step continuous hot-melt extrusion (HME) process to address these drawbacks. In this study, Capmul® MCM, Gelucire® 48/16, and propylene glycol were selected as oil, surfactant, and co-surfactant, respectively, for the preparation of S-SNEDDS. Soluplus® and Klucel™ EF (1:1) were selected as the solid carrier. Response surface methodology in the form of central composite design (CCD) was utilized in the current experimental design to develop the S-SNEDDS formulations via a continuous HME technology. The developed formulations were evaluated for self-emulsifying properties, particle size distribution, thermal behavior, crystallinity, morphology, physicochemical incompatibility, accelerated stability, and in vitro drug release studies. The globule size and emulsification time of the optimized SNEDDS formulation was 92.27 ± 3.4 nm and 3.4 ± 3.38 min. The differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies revealed the amorphous nature of the drug within the formulation. There were no drug-excipient incompatibilities observed following the Fourier transform infrared (FTIR) spectroscopy. The optimized formulation showed an extended-release profile for 24 h. The optimized formulation was stable for three months (last time-point tested) at 40 °C/75% RH. Therefore, the developed S-SNEDDS formulation could be an effective oral delivery platform for QTF and could lead to better therapeutic outcomes.

Quality by design aided self-nano emulsifying drug delivery systems development for the oral delivery of Benidipine: Improvement of biopharmaceutical performance

The primary objective of the research effort is to establish efficient solid self-nanoemulsifying drug delivery systems (S-SNEDDS) for benidipine (BD) through the systematic application of a quality-by-design (QbD)-based paradigm. Utilizing Labrafil M 2125 CS, Kolliphor EL, and Transcutol P, the BD-S-SNEDDS were created. The central composite design was adopted to optimize numerous components. Zeta potential, drug concentration, resistance to dilution, pH, refractive index, viscosity, thermodynamic stability, and cloud point were further investigated in the most efficient formulation, BD14, which had a globule size of 156.20 ± 2.40 nm, PDI of 0.25, zeta potential of −17.36 ± 0.18 mV, self-emulsification time of 65.21 ± 1.95 s, % transmittance of 99.80 ± 0.70%, and drug release of 92.65 ± 1.70% at 15 min. S-SNEDDS were formulated using the adsorption process and investigated via Fourier transform infrared spectroscopy, Differential scanning calorimeter, Scanning electron microscopy, and powder X-ray diffraction. Optimized S-SNEDDS batch BD14 dramatically decreased blood pressure in rats in contrast to the pure drug and the commercial product, according to a pharmacodynamics investigation. Accelerated stability tests validated the product’s stability. Therefore, the development of oral S-SNEDDS of BD may be advantageous for raising BD's water solubility and expanding their releasing capabilities, thereby boosting oral absorption.

The role of synbiotics in Alzheimer`s management

AbstractBackgroundQuercetin and Lactobacillus Brevis were used in the development of S‐SNEDDS for their antiinflammaging effect in Alzheimer`s diseaseMethodThe isotropic mixture was prepared by incorporating Capmul MCM, Tween 80 and Transcutol P as oil, surfactant and co surfactant phases respectively. Quercetin was then added. The probiotic mixture was selected as a solid carrier and drug loading was calculated. The droplet size and zeta potential was also determined. The formulation was also assessed for differential scanning colorimetry (DSC), powder x ray diffraction studies (PXRD), and field emission scanning electron microscopy studies (FESEM). Stability studies of the developed formulation was also carried out. Alzheimer’s disease was induced in rats by the use of aluminum chloride (100mg/kg) after taking necessary permission from the institution animal ethical committee. The Morris water maze (MWM) test was used to assess the animals 48 hours following the last treatment. Utilizing marketed ELISA kits, the concentrations of TNF, IL‐1, and IL‐6 were determined.ResultQuercetin was solubilized in the isotropic mixture. The drug loading was found to be 93.4±0.75% for the liquid SNEDDS (QUE‐L‐SNEDDS) formulation. The droplet size of QUE‐L‐SNEDDS was found to be 73.24±1.45nm and had a zeta potential of ‐23.21±1.34 mV. Whereas, the solid SNEDDS (QUE‐LB‐S‐SNEDDS) was found to be 74.56±1.23 nm and had a zeta potential of ‐21.43 mV, respectively. This indicated that there was no change in the L‐SNEDDS and S‐SNEDDS formulation. Further, the amorphous nature of quercetin was confirmed by the DSC, PXRD and FESEM studies. Aluminum chloride was successful in inducing Alzheimer`s disease in the rats. Impaired learning and memory impairments, increased short‐term memory loss, and decreased locomotor activity were all observed in the negative controls. The developed formulation was successful in reversing the inflammatory effects of Alzheimer’s disease.ConclusionThe present study reveals that Quercetin and Lactobacillus Brevis can be used as a symbiotic combination as well as an adjuvant therapy in the treatment of inflammation related to Alzheimer’s disease. The results reveal an interesting outcome at the preclinical level and warrants future studies aimed at other plant based polyphenolic compounds especially in neurodegenerative diseases such as Alzheimer’s disease.

Impact of carrier hydrophilicity on solid self nano-emulsifying drug delivery system and self nano-emulsifying granule system

The purpose of this study was to investigate the impact of carrier hydrophilicity on solid self nano-emulsifying drug delivery system (SNEDDS) and self nano-emulsifying granule system (SEGS). The mesoporous calcium silicate (Ca-silicate) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were utilised as hydrophobic carrier and hydrophilic carrier, respectively. The liquid SNEDDS formulation, composed of Tween80/Kollipohr EL/corn oil (35/50/15%) with 31% (w/w) dexibuprofen, was spray-dried and fluid-bed granulated together with Avicel using Ca-silicate or HP- β-CD as a solid carrier, producing four different solid SNEDDS and SEGS formulations. Unlike the Ca-silicate-based systems, spherical shape and aggregated particles were shown in HP-β-CD-based solid SNEDDS and SEGS, respectively. Molecular interaction was detected between Ca-silicate and the drug; though, none was shown between HP-β-CD and the drug. Each system prepared with either carrier gave no significant differences in micromeritic properties, crystallinity, droplet morphology, size, dissolution and oral bioavailability in rats. However, the HP-β-CD-based system more significantly improved the drug solubility than did the Ca-silicate-based system. Therefore, both carriers hardly affected the properties of both solid SNEDDS and SEGS; though, there were differences in the aspect of appearance, molecular interaction and solubility.

Enhancement of Icariin Aphrodisiac Effect by Solid-SNEDDS Method Using Shark Liver Oil Phase

The Epimedium brevicornu Maxim plant contains icariin, a flavonoid compound known for its aphrodisiac effects. However, icariin has low solubility and bioavailability. This study aims to find the best formula for S-SNEDDS icariin, its physical properties, characteristics, and aphrodisiac activity. Using the S-SNEDDS (Solid-Self Nanoemulsifying Drug Delivery System) method with shark liver oil phase is expected to increase the solubility and bioavailability of icariin. The optimum formula used is tween 80 (72.5%): PEG 400 (13.75%) and shark liver oil (13.75%). The optimal formula of S-SNEDDS icariin with the adsorption method to solid carriers requires aerosol 200 as much as 783±28.86mg per 1mL. S-SNEDDS icariin has characteristics with an average emulsification time of 12.88±0.26 seconds, transmittance value of 98.08±0.94%, droplet size 171.8±8.9 nm, zeta potential -35.2±1.1 mV, flow speed less than 10 seconds, resting angle 35.159°. The dissolution test of S-SNEDDS icariin is better than icariin instead of S-SNEDDS. S-SNEDDS icariin dose 50 mg/KgBW has a better aphrodisiac effect than pure icariin 100 mg/kgBW.

Development and optimization of Ropinirole loaded self-nanoemulsifying tablets

BackgroundThe present research work aims to develop a Ropinirole-loaded self-Nanoemulsifying Drug Delivery system. Ropinirole has limited oral bioavailability due to substantial first-pass metabolism, which ultimately results in poor oral bioavailability and reduces plasma drug concentration and an overall reduction in therapeutic effects. Avoiding hepatic first-pass metabolism by increasing lymphatic uptake is the goal of the creation of the Ropinirole Self-NanoEmulsifying System. The solvent system for the liquid Self-NanoEmulsifying Drug Delivery System (SNEDDS) was optimized using Box-Behnken Design, where the concentration of oil(X1), surfactant (X2), and co-surfactant(X3) were taken as independent variables. The formulated liquid SNEDDS were then converted into solid SNEDDS by the adsorption method for improving patient compliance.ResultsThe obtained mean droplet size of the formulated SNEDDS was 96.71 nm, and the rate of emulsification was 22 s. Liquid SNEDDS was converted into solid SNEDDS using Syloid 244 FP as adsorbent. Scanning Electron Microscopy (SEM) study shows well-separated particles adsorbed on Syloid 244 FP. In vitro drug release studies show better release from solid and liquid SNEDDS when compared to pure suspension.ConclusionsRopinirole-loaded SNEDDS can be a better option for reducing the extensive first-pass metabolism associated with Ropinirole.

Self-nanoemulsifying drug delivery system (SNEDDS) of docetaxel and carvacrol synergizes the anticancer activity and enables safer toxicity profile: optimization, and in-vitro, ex-vivo and in-vivo pharmacokinetic evaluation.

Docetaxel (DTX) is a first-line chemotherapeutic molecule with a broad-spectrum anticancer activity. On the other hand, carvacrol (CV) has anti-inflammatory, antioxidant, cytotoxic, and hepatoprotective properties that could reduce undue toxicity caused by DTX chemotherapy. Thus, in order to overcome the challenges posed by DTX's poor aqueous solubility, low permeability, hepatic first pass, and systemic toxicities, we have developed a novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) co-loaded with DTX and CV. In the present investigation, liquid-SNEDDS (L-SNEDDS) were fabricated using Nigella sativa oil, Cremophor RH 40, and Ethanol which was converted into solid by lyophilization using Aerosil 200. The reconstituted CV-DTX-S-SNEDDS showed an average globule size of < 200nm with promising flow properties (angle of repose θ: 33.22 ± 0.06). Additionally, 2.3-fold higher dissolution of DTX was observed from CV-DTX-S-SNEDDS after 6h as compared to free DTX. Similar trend was followed in dialysis release experiments with 1.5-fold higher release within 24h. Ex vivo permeation studies demonstrated significantly increased permeation of 1077.02 ± 12.72μg/cm2 of CV-DTX-S-SNEDDS after 12h. In vitro cell cytotoxicity studies revealed 5.2-fold reduction in IC50 as compared to free DTX in MDA-MB-231 cells. Formulation was able to induce higher apoptosis in cells treated with CV-DTX-S-SNEDDS as compared to free DTX and CV. It was evident from toxicity studies that CV-DTX-S-SNEDDS was well tolerated at higher dose where CV was able to manage the toxic effects of free DTX. In vivo pharmacokinetic study showed 3.4-fold increased Cmax and improved oral bioavailability as compared to free DTX. Thus, CV-DTX-S-SNEDDS could be an encouraging option for facilitating DTX oral therapy.

Development of a sorafenib-loaded solid self-nanoemulsifying drug delivery system: Formulation optimization and characterization of enhanced properties.

Sorafenib, marketed under the brand name Nexavar®, is a multiple tyrosine kinase inhibitor drug that has been actively used in the clinical setting for the treatment of several cancers. However, the low solubility and bioavailability of sorafenib constitute a significant barrier to achieving a good therapeutic outcome. We developed a sorafenib-loaded self-nanoemulsifying drug delivery system (SNEDDS) formulation composed of capmul MCM, tween 80, and tetraglycol, and demonstrated that the SNEDDS formulation could improve drug solubility with excellent self-emulsification ability. Moreover, the sorafenib-loaded SNEDDS exhibited anticancer activity against Hep3B and KB cells, which are the most commonly used hepatocellular carcinoma and oral cancer cell lines, respectively. Subsequently, to improve the storage stability and to increase the possibility of commercialization, a solid SNEDDS for sorafenib was further developed through the spray drying method using Aerosil® 200 and PVP K 30. X-ray diffraction and differential scanning calorimeter data showed that the crystallinity of the drug was markedly reduced, and the dissolution rate of the drug was further improved in formulation in simulated gastric and intestinal fluid conditions. In vivo study, the bioavailability of the orally administered formulation increases dramatically compared to the free drug. Our results highlight the use of the solid-SNEDDS formulation to enhance sorafenib's bioavailability and outlines potential translational directions for oral drug development.

Investigation of In Vivo Bioavailability Enhancement of Iloperidone-Loaded Solid Self-Nanoemulsifying Drug Delivery Systems: Formulation and Optimization Using Box-Behnken Design and Desirability Function

Investigation of In Vivo Bioavailability Enhancement of Iloperidone-Loaded Solid Self-Nanoemulsifying Drug Delivery Systems: Formulation and Optimization Using Box-Behnken Design and Desirability Function

Adsorbent Precoating by Lyophilization: A Novel Green Solvent Technique to Enhance Cinnarizine Release from Solid Self-Nanoemulsifying Drug Delivery Systems (S-SNEDDS).

Solidification by high surface area adsorbents has been associated with major obstacles in drug release. Accordingly, new approaches are highly demanded to solve these limitations. The current study proposes to improve the drug release of solidified self-nanoemulsifying drug delivery systems (SNEDDS) to present dual enhancement of drug solubilization and formulation stabilization, using cinnarizine (CN) as a model drug. The solidification process involved the precoating of adsorbent by lyophilization of the aqueous dispersion of polymer-adsorbent mixture using water as a green solvent. Then, the precoated adsorbent was mixed with drug-loaded liquid SNEDDS to prepare solid SNEDDS. The solid-state characterization of developed cured S-SNEDDS was done using X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC). In vitro dissolution studies were conducted to investigate CN SNEDDS performance at pH 1.2 and 6.8. The solidified formulations were characterized by Brunauer-Emmett-Teller (BET), powder flow properties, scanning electron microscopy, and droplet size analysis. In addition, the optimized formulations were evaluated through in vitro lipolysis and stability studies. The cured solid SNEDDS formula by PVP k30 showed acceptable self-emulsification and powder flow properties. XRD and DSC revealed that CN was successfully amorphized into drug-loaded S-SNEDDS. The uncured solid SNEDDS experienced negligible drug release (only 5% drug release after 2 h), while the cured S-SNEDDS showed up to 12-fold enhancement of total drug release (at 2 h) compared to the uncured counterpart. However, the cured S- SNEDDS showed considerable CN degradation and decrease in drug release upon storage in accelerated conditions. The implemented solidification approach offers a promising technique to minimize the adverse effect of adsorbent on drug release and accomplish improved drug release from solidified SNEDDS.

Optimized L-SNEDDS and spray-dried S-SNEDDS using a linked QbD-DM3 rational design for model compound ketoprofen

A QbD-DM3 strategy was used to design ketoprofen (KTF) optimized liquid (L-SNEDDS) and solid self-nanoemulsifying drug delivery systems (S-SNEDDS). Principal component analysis was used to identify the optimized L-SNEDDS containing Capmul® MCM NF, 10 % w/w; Kolliphor® ELP, 60 % w/w; and propylene glycol, 30 % w/w. The S-SNEDDS was manufactured by spray-drying a feed dispersion prepared by dissolving the optimized KTF-loaded L-SNEDDS in an ethanol-Aerosil® 200 dispersion. A Box Behnken design was employed to evaluate the effect of drug concentration (DC), Aerosil® 200 concentration (AC) and feed rate (FR) on maximizing percent yield (PY) and loading efficiency (LE). The optimal levels of DC, AC, and FR were 19.9 % w/w, 30.0 % w/w, and 15.0 %, respectively. The optimized S-SNEDDS was amorphous, and its dissolution showed a 2.37-fold increase in drug release compared to KTF in 0.1 HCl. An optimized independent spray-dried S-SNEDDS verification batch showed that the predicted and observed PY and LE were 70.49 % and 92.49 %, and 70.02 % and 91.27 %, respectively. The optimized L-SNEDDS and S-SNEDDS also met their quality target product profile criteria for globule size <100 nm, polydispersity index < 0.400, emulsification time < 30 s, and KTF L-SNEDDS solubility 100-fold greater than its water solubility.

Multivariate Data Analysis and Central Composite Design-Oriented Optimization of Solid Carriers for Formulation of Curcumin-Loaded Solid SNEDDS: Dissolution and Bioavailability Assessment.

The study was initiated with two major purposes: investigating the role of isomalt (GIQ9) as a pharmaceutical carrier for solid self-nanoemulsifying drug delivery systems (S-SNEDDSs) and improving the oral bioavailability of lipophilic curcumin (CUN). GIQ9 has never been explored for solidification of liquid lipid-based nanoparticles such as a liquid isotropic mixture of a SNEDDS containing oil, surfactant and co-surfactant. The suitability of GIQ9 as a carrier was assessed by calculating the loading factor, flow and micromeritic properties. The S-SNEDDSs were prepared by surface adsorption technique. The formulation variables were optimized using central composite design (CCD). The optimized S-SNEDDS was evaluated for differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), microscopy, dissolution and pharmacokinetic studies. The S-SNEDDS showed a particle size, zeta potential and PDI of 97 nm, -26.8 mV and 0.354, respectively. The results of DSC, XRD, FTIR and microscopic studies revealed that the isotropic mixture was adsorbed onto the solid carrier. The L-SNEDDS and S-SNEDDS showed no significant difference in drug release, indicating no change upon solidification. The optimized S-SNEDDS showed 5.1-fold and 61.7-fold enhancement in dissolution rate and oral bioavailability as compared to the naïve curcumin. The overall outcomes of the study indicated the suitability of GIQ9 as a solid carrier for SNEDDSs.

Development of Guar Gum-Pectin-Based Colon Targeted Solid Self-Nanoemulsifying Drug Delivery System of Xanthohumol.

Present study deciphers development of oral polysaccharide-based colon targeted solid self-nanoemulsifying drug delivery system (S-SNEDDS) of xanthohumol (XH). Several studies have shown that XH has anti-inflammatory and antioxidant properties, suggesting that it could be a good candidate for the treatment of colorectal diseases (CRD). Despite its potential, XH has a low aqueous solubility. As a result, its bioavailability is constrained by the dissolution rate. The liquid (L)-SNEDDS was constituted using Labrafac PG as oil, Tween 80 as surfactant and Transcutol P as co-surfactant. The L-SNEDDS was then adsorbed onto the surface of guar gum and pectin and developed into S-SNEDDS powder. Ternary phase diagram was used to optimize the process of developing L-SNEDDS. The formulation showed mean droplet size of 118.96 ± 5.94 nm and zeta potential of -19.08 ± 0.95 mV and drug loading of 94.20 ± 4.71%. Dissolution studies carried out in medium containing rat caecal contents (RCC) represented the targeted release of S-SNEDDS powder. It was observed that S-SNEDDS showed less than 10% release XH in initial 5 h and rapid release occurred between the 5th and 10th hour. Results of cytotoxicity studies revealed good cytotoxicity of XH loaded S-SNEDDS for Caco2 cells as compared to raw-XH.

Polysaccharide, fecal microbiota, and curcumin-based novel oral colon-targeted solid self-nanoemulsifying delivery system: formulation, characterization, and in-vitro anticancer evaluation

The use of polysaccharides in preparation of microbially triggered colon-targeted delivery system has been explored extensively to deliver drugs at the colonic site. This type of targeting is attributed to inherent property of polysaccharides by virtue of which they are digested in the gut only by the colonic microflora. In last two decades, the use of fecal microbiota transplantation (FMT) has been reported widely to treat colonic diseases such as Crohn's disease, irritable bowel syndrome, and recurrent Clostridium difficile infection. It has been established that FMT downregulates inflammatory proliferation and pro carcinogenic pathways. Although a few reports exist on the use of colon-targeted FMT capsules in increasing the microbial diversity of gut microflora, they have not been able to establish clinical superiority of the colon-targeted capsules over conventional orally administered capsules. Hence, in the present study, an attempt has been made to utilize a multipronged strategy through a single formulation, wherein an anticancer phytoconstituent, polysaccharides, fecal microbiota extract (FME), and nanodelivery systems have been designed for the effective treatment of colon cancer. Overall, the study is aimed toward the development of an oral colon-targeted solid self-nanoemulsifying drug delivery system (S-SNEDDS) in which curcumin (CCM) was loaded. These SNEDDS were added to polysaccharide mixture of guar gum, pectin, lactose along with aerosol 200 (A-200) and then to the slurry of fecal microbiota extract. The liquid was then freeze dried and developed into solid SNEDDS powder. The process of formulating liquid SNEDDS was optimized using ternary phase diagram and Box Behnken Design. The developed formulation was characterized for physicochemical, physicomechanical, drug release and cytotoxic potential studies. The droplet size of reconstituted S-SNEDDS was found to be 78.46 ± 0.87 nm. The site-specific release of S-SNEDDS powder was confirmed by dissolution studies in medium containing rat caecal contents, wherein, the formulation containing guar gum and pectin in 1% w/w ratio showed less than 10% drug release in initial 5 h and burst release between 5th and 10th h indicating colon-specific release of CCM. Significant cytotoxic effect was seen for CCM-loaded S-SNEDDS as compared to control formulations. The use of 16s metagenomic technique confirmed no significant change in fecal microbiota composition of formulation pre- and postlyophilization. Overall, the study suggested a novel, oral colon-targeted SNEDDS-based formulation containing fecal microbiota and CCM for the treatment of colon cancer.

Preparation of Solid Self-Nanoemulsifying Drug Delivery Systems (S-SNEDDS) by Co-Extrusion of Liquid SNEDDS and Polymeric Carriers-A New and Promising Formulation Approach to Improve the Solubility of Poorly Water-Soluble Drugs.

The present study focused on a new formulation approach to improving the solubility of drugs with poor aqueous solubility. A hot melt extrusion (HME) process was applied to prepare drug-loaded solid self-nanoemulsifying drug delivery systems (S-SNEDDS) by co-extrusion of liquid SNEDDS (L-SNEDDS) and different polymeric carriers. Experiments were performed with L-SNEDDS formulations containing celecoxib, efavirenz or fenofibrate as model drugs. A major objective was to identify a polymeric carrier and process parameters that would enable the preparation of stable S-SNEDDS without impairing the release behavior and storage stability of the L-SNEDDS used and, if possible, even improving them further. In addition to commercially available (co)polymers already used in the field of HME, a particular focus was on the evaluation of different variants of a recently developed aminomethacrylate-based copolymer (ModE) that differed in Mw. Immediately after preparation, the L-SNEDDS and S-SNEDDS formulations were tested for amorphicity by differential scanning calorimetry. Furthermore, solubility and dissolution tests were performed. In addition, the storage stability was investigated at 30 °C/65% RH over a period of three and six months, respectively. In all cases, amorphous formulations were obtained and, especially for the model drug celecoxib, S-SNEDDS were developed that maintained the rapid and complete drug release of the underlying L-SNEDDS even over an extended storage period. Overall, the data obtained in this study suggest that the presented S-SNEDDS approach is very promising, provided that drug-loaded L-SNEDDS are co-processed with a suitable polymeric carrier. In the case of celecoxib, the E-173 variant of the novel ModE copolymer proved to be a novel polymeric carrier with great potential for application in S-SNEDDS. The presented approach will, therefore, be pursued in future studies to establish S-SNEDDS as an alternative formulation to other amorphous systems.

FORMULATION AND EVALUATION OF SOLID-SUPERSATURABLE-SNEDDS OF IBRUTINIB

Objective: The aim of current research is to develop a solid supersaturable self-nanoemulsifying drug delivery system (S-SNEDDS) of ibrutinib for enhancing the solubility and Bioavailability. Methods: Crossential O 94–Croduret 40SS–carbitol are chosen based on the maximum solubility of ibrutinib and were used to construct ternary phase diagrams with Smix in 3:1 ratio and 70 mg drug loading was done and evaluated for particle size, zeta potential, polydispersity index, entrapment efficiency, drug content and in vitro drug release. Final optimised one is characterised for FTIR, DSC, stability studies and in-vivo studies in rats. To choose a precipitation inhibitor, in vitro precipitation studies were carried out, and supersaturable SNEDDS were made the prepared formulations were evaluated for micromertitic properties and the final optimised one is characterized for FTIR, DSC, SEM and stability studies. Results: Out of all formulations, F15 exhibited good results with the highest drug release of 98.25% in 60 min. LSS9 with 3% HPMC E4M as the best precipitation inhibitor (PPI) exhibited the smallest droplet size of 65.4 nm, a zeta potential of-17.7 mV, and a PDI of 0.453. SSS1 with magnesium trisilicate as an adsorbent showed best flow characteristics and the highest drug content of 99.72%. The DSC, FT-IR and stability studies confirmed the complexation of ibrutinib and amorphous state of the drug and formulation to be stable for 3 mo. Cmax of the solid supersaturable SNEDDS 139.42±2.16 mg/l was significant (p&lt;0.05) as compared to the pure drug suspension formulation 38.15±1.46 mg/l. Tmax of solid supersaturable SNEDDS formulation and pure drug suspension was 1.00±0.06 h and 1.50±0.02h, respectively. Statistically, AUC of the solid supersaturable SNEDDS formulation was significantly higher (p&lt;0.05) as compared to pure drug suspension formulation. Conclusion: Thus, this study indicated that the solid SNEDDS could be used as a potential drug carrier for ibrutinib with improved solubility and and bioavailability.

Solubility Enhancement of Poorly Soluble Drug Ezetimibe by Developing Self Nano Emulsifying Drug Delivery System

Objectives: To enhance solubility, dissolution, and permeability of poorly water-soluble drug Ezetimibe (EZE) using a self-nano emulsifying drug delivery system (SNEDDS). Methods: Initially, the solubility of the EZE was determined in various oils and buffers. Surfactants and co-surfactants were screened based on the solubility of the drug in oil as per the emulsification efficacy test. Liquid SNEDDS was developed and characterized. Solid SNEDDS was developed and characterized using optimized liquid SNEDDS followed by the development of EZE-loaded Tablet SNEDDS. Finding: Liquid SNEDDS (LSNEDDS) was formulated using Capmul MCM C8 EP, Cremophore RH 40, and Labrafil M 2125 CS as oil, surfactant, and co-surfactant respectively. Optimized L-SNEDDS formulation was found to be efficient with an average %T of 99.5%, drug content of 98.43%, flask inversion 0 numbers, and the average particle size of 36.7 nm, zeta potential of -57.5 mV, Polydispersibility index in of 0.119. Also, the in vitro release profile of drug from L-SNEDDS encapsulated in hard gelatin capsules was evaluated in different dissolution media viz. simulated gastric fluid and simulated intestinal fluid. For the drug, more than 95% cumulative release was observed within 30 min exclusive of the pH of the medium. The L-SNEDDS were adsorbed on a solid support and then mixed with tablet blends and compressed into tablets. Further, no adverse changes in globule size, shape, the zeta potential of SNEDDS, and dissolution profile were apparent on conversion to solid powder form and tablet form. Novelty: The developed liquid SNEDDS form of EZE showed enhanced solubility, dissolution, and permeability in comparison to pure drugs. Conversion of L-SNEDDS to PSNEDDS would be a novel approach to overcome the limitations associatedwith liquid dosage forms. Keywords: Ezetimibe (EZE); Selfnano emulsifying drug delivery system (SNEDDS); liquid SNEDDS (L SNEDDS); powder SNEDDS (PSNEDDS); Tablet SNEDDS (TSNEDDS)